Thiele 6162 Masterweigh Duplex Scale

MasterWeigh Scale

The Thiele Model 6162 MasterWeigh Scale combines two MasterWeigh Simplex scales within one framework. While one scale fills, the other dumps, dramatically increasing your bagging production.

Each scale provides extremely accurate, high-speed weighing of a wide range of products, from granular free-flowing products to semi free-flowing products.

The scale controls can be integrated into the bagger control program, so you can operate the scale and bagger from one touchscreen.

All product contact surfaces are made of stainless steel. Plus, they are angled to enhance product flow and simplify cleaning. The electronic weigh system is isolated in a sealed, dust-free environment.

Production Rate
  • Up to 20 cycles per minute, per scale, dependent on product

Spout Sizes
  • Taper Grip: 152.4 and 203.2mm (6" and 8")
  • Power Grip Spout: 174.62 x 228.6mm (6 7/8" - 10 3/16")
  • Elliptical Spout: 203.2 x 258.76mm (8" x 10-3/16")
  • Round Spout: 266.7mm (10.5")

Power Requirements
  • Input Power: 115 volts, 1-phase, 0.764 amps
  • Control Circuit: 24 VDC
  • Max Current Draw: Gravity bulk/gravity dribble: 6.0 amps
  • Gravity bulk/vibrator dribble: 10.0 amps
  • Two-speed belt: 20.0 amps

Air Requirements
  • Operating Pressure: 80 psi (551 kPa)
  • Line Pressure: 90 psi (620 kPa)
  • Air Use/Cycle: 0.25 cubic ft. (7.0 liters) max per bucket
  • State-of-the-art, electronic platform load cell for precise weighments between 20 to 110 lbs. (9 to 50 kg)
  • Product weighments stabilize faster and are more accurate
  • Extremely accurate two-stage weighing system with a choice of feed sections depending on the types of product to be weighed
  • Computer control systems control and monitor the weighing operation, as well as storing data for future analysis of production runs
  • Automatic calibration option is available 

Download a Brochure